LoRa Alliance | Home
lora-hardware

Dragino LoRa Shield

The Dragino LoRa Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

The LoRa Shield based on Semtech SX1276/SX1278 chip, it targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

lora-hardware-2

DraginoLora/GPS_HAT

The DraginoLora/GPS_HAT is a expension module forLoRaWan and GPS for ues with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions.

The Lora/GPS HAT is based on the SX1276/SX1278 transceiver.The add on L80 GPS (Base on MTK MT3339) is designed for applications that use a GPS connected via the serial ports to the Raspberry Pi such as timing applications or general applications that require GPS information.

lora-hardware-3

iC880A - LoRaWAN Concentrator 868MHz

iC880A is able to receive packets of different end devices send with different spreading factors on up to 8 channels in parallel. Due to the fact that the combination of spreading factors and signal bandwidths results in different data rates the use of “Dynamic Data-Rate Adaption” becomes possible. That means that LoRa™ nodes with high distances from the concentrator must use higher spreading factors and therefore have a lower data rate. LoRa™ nodes which are closer to the concentrator can use lower spreading factors and therefore can increase their data rate. This allows to build easy to handle star or multiple star networks without the need of routers or repeaters. In combination with an embedded Linux board like Raspberry Pi, Beagle Bone, Banana Pi and the HAL software from https://github.com/Lora-net a complete LoRaWAN™ gateway can be setup easily.

lora-hardware-4

iM880B-L - Long Range Radio Module

The iM880B-L is a compact and low-cost radio module that operates in the unlicensed 868 MHz band and combines a powerful Cortex-M3 controller with the new LoRa™ transceiver SX1272 of Semtech Corporation.

A sensitivity of up to -138 dBm and a maximum output power of +19dBm results in a link budget of more than 156 dB. Even when reducing the output power to +14dBm rangesbeyond 15 km are possible in free space. The iM880B-L is pre-certified according the European R & TTE guideline and can be soldered like an SMD component.

lora-hardware-5

The MultiConnect®mDotTM

The MultiConnect®mDotTMis an inexpensive LoRaWANTM Ready, Low-Power Wide Area Network (LPWAN) RF module, capable of 2-way communication over distances in excess of 10 miles / 16 km with excellent noise immunity and the ability to penetrate deep into buildings and through structures.

The mDot brings intelligence, reduced complexity and lower overall build of material cost to the very edge of the network by supporting a low power ARM® Cortex®-M4 processor, running ARM's mbedTM OS, complete with developer friendly libraries to optimize RF performance, distribute decision making to the network edge, control and monitor remote field assets.